About Me

~♥~Tuts Regulations~♥~

Welcome to my Tuts Regulations each tutorial that is share here is handwritten by me to teach you how to make graphic tag designs, each one is sample with my name *Tinkers Boo* on it as shown as sample design.

All materials is provide sometimes you may need to purchase Scrap kit and/or PSP Tube/Poser. All tutorials are design to teach yow how to work with scrap kits designs of mine or other artists whom makes scrap kits that I have permission to use for writing as I promote their designs and/or site.

No blanks designs are provide but if you join my forum you may request for them under my tag offers as I will share them from time to time for members to request names add to them and/or you may request name be add this only provide for members of my forum.

Thanks for stopping by may you enjoy my tuts, and/or other psp graphics as I tinker away xx

Hugs Tinkers Boo aka Sunny
Owner & Graphic Designer

Sunday, June 17, 2018

Island Life Tutorial *It's Animation*

Ujhwizke o
Island Life Tutorial *It's Animation*

Materials Need:

Purchase Cookie Bikini 1 HERE
 Ocean Isle Kit  HERE (free)
(by Melissaz Creationz)
Summer Sensations Tag Template HERE (Free)
Jasc Animation HERE (free) 

Open PSP Program

1. Open the tag template go to Windows>Duplicate close the original out now delete the copyright banner. Then delete the 2 palm tree templates we don't need for this tutorial

2. Open Element 18 go to Edit>Copy now go down to the sand template an go to Selections>Select all>Float now go to Edit>Paste into new raster layer an with your move tool adjust the sand into the marching ants once please go to Selections>Invert now go to Edit>Cut then go to Selections>Select None

3. Open Element 6 an go to Edit>Copy now go down to the white template (raster 2) an go to Edit>Paste into new raster layer an with your move tool place the waves on the left side once in place go to Layers>Duplicate Image>Mirror an adjust it on the right side

4. Go to the sand an go to Layers>Duplicate an move it over an edge on the right side (if you need to erase behind the beach ball do so as I had to )

5. Open Element 2 go to Image>Resize 45% now go to Edit>Copy now go to the sand layer an go to Edit>Paste into new raster layer an with your move tool place the palm tree on the right side of the sand line up with waves then go to Layers>Duplicate and move the duplicate over by the surfboards you have to erase just a little bit of the water on the palm tree that is touching the surfboard as shown above

6. Open Element 1 go to Image>Resize 600 width pixels click okay now go to Edit>Copy now go above the waves an go to Edit>Paste into new raster layer an with your move tool place it on the top of the white template now take your selection tool an make an square around the element to cut off the ends that show on the black template (optional)

7. Open Paper 10 add it to your foreground pattern 0 angle, 100 scales click okay now go down to the white template (raster 2) and go to Selections>Select all>Float now go to Layers>Add new raster layer now click on your paint can an paint the blue paper into the marching ants then go to your 3d Effects>Drop Shadow of -2 -2 50 2 black click okay then again at 2 2 50 2 black click okay now go to Selections>Select None

8. Open Paper 8 add it to your foreground pattern 45vangle, 50 scales click okay now go to black template (raster 1) and go to Selections>Select all>Float now go to Layers>Add new raster layer now click on your paint can and paint the blue dot paper into the marching ants then go to Selections>Select None

9. Open Paper 12 add it to your foreground pattern 45 angle, 50 scales click okay now go down to the surfboard (left side) go to Adjust>Brightness and Contrast with this setting below

Brightness -61
Contrast 27
Check Linear Mode

Click okay now go to Selections>Select all>Float now go to Layers>Add new raster layer click on your paint can and paint the pattern paper into the marching ants of the new raster layer now go to Adjust>Brightness and Contrast again with this setting below

Brightness -17
Contrast 27
Check Linear Mode

Click okay then go to Selections>Select None. (2 different shadows to the surfboard gives the effect I want lol)

10. Open Paper 4 add it to your foreground pattern 45 angle, 50 scales click okay now go to the surfboard template (right side) go to Adjust>Brightness and Contrast with this setting below

Brightness -61
Contrast 27
Check Linear Mode

Click okay now go to Selections>Select all>Float now go to Layers>Add new raster layer now click on your paint can and paint the strip paper into the marching ants of the new raster layer go to your Blend>Overlay then go to Selections>Select None. Close the paper

11. Delete the Beach ball 3 templates , Open Beach Ball element 33 and go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an place the beach ball down on the left side as shown above

12. Open Element 13 go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the scooter in front of the surfboards of  the sand as shown above once in place take your (default setting) wrap brush push a little up on the front/back of the tires

13. Delete the word art

14. Open Element 9 go to Image>Resize 80% now go to Image>Mirror then go to Image>Flip (vertical) then go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer with your move tool place the flowers on the upper right corner once in place go to Layers>Duplicate, Image>Mirror adjust it on the upper left side

15.  Open Element 45 Island Life word art an go to Image>Resize 80% now go to Edit>Copy now go to the top of the image layers an go to Edit>Paste into new raster layer an with your move tool place it up on the top between the 2 flowers corners as shown above

16. Open Element 21 go to Edit>Copy now go down to the waves go to Edit>Paste into new raster layer an with your move tool place it on the right side behind the palm tree as shown above

17. Open Element 17 go to Edit>Copy now go above the sand an go to Edit>Paste into new raster layer an with your move tool place the blue flower on the left side of the (right palm tree) once in place go to Layers>Duplicate move the blue flower by the (left palm tree) as shown above

18. Open Element 19 go to Image>Resize 80% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the towel in front of the palm tree in the sand once in place take your wrap brush a little around it

19. Open Element 5 (lizard) and go to Image>Resize 70% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the lizard on top of the towel as shown above

20. Open Element 10 an go to Image>Resize 55% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the bird on top of the image then go to Layers>Duplicate 2 times move the bird on the left/right where you want it then close all 3 layers off we get to it in a moment

21. Open Cookie Bikini (go to raster 4 ) go to Edit>Copy then go to Edit>Paste into new Image then go to Image>Resize 600 height pixels click okay then go to Image>Resize 80% then go to Edit>Copy now go to the top image layers and go to Edit>Paste into new raster layer an with your move tool place her on the left side of the scooter as shown above her finger will line up with the scooter once in place take your wrap brush an push a little up on her feet as blend her feet with  the sand

22. Go to Cookie layer an go to 3d Effects>Drop Shadow of 0 0 70 25 black click okay

23. Add copyright to Cookie layer with the copyright as shown below

   ©Tinkers Boo
www.picsfordesign.com
PFD# (copyright license number) by (name)


24. Close off Cookie Layer then go down to the close off layers go to Layers>Merge>Merge Visible now you should have 4 images we going to save them now move to Jasc Animation program so do the following below


 A. Open All close off  layers


 B. Go to Windows>Duplicate it 3 times


 C. Now if you like me and you open MC Kit either put it into an folder or delete the kit from your picture documents


D. Close off Cookie layer go beneath and go to Layers>Merge>Merge Visible now delete it image then open Cookie an go to File Save as PNG format Cookie


E. Now close off the background image go to the top of the layers an go to Layers>Merge>Merge Visible now delete the images of Cookie with the birds, then open the background image an go to File save as PNG format background


F. Now delete cookie and background, take your crop tool an crop the 3 birds together (make an rectangle left/right of the edge keeping the 3 birds together) now go to Windows>Duplicate 2 times
now one by one save the birds name them bird 1, bird 2, bird 3 in PNG Format  ( I save the center, then the right one then the left one as they will move around in a moment)


25. Open Jasc Animation


26. Go to File>Animation Wizard do the following steps below


 Same as 1st image frame click next
Transparent click next
 Upper left corner/with canvas color click next
Yes repeat/45 click next
Add Image, Bird 2, 3, 1, 2, 1, 3 click next
Click Finish (just create animation)

Go to View>Animation see the bird move

27. Open the background image an go to Edit>Select all, Edit>Copy then Edit>Duplicate go to F:5 now scroll to F:5 highlight it an go to Edit>Duplicate one time so you have an reading of F;6 now scroll 1st frame window

28. Take the bird animation 1st frame window an go to Edit>Select all, Edit>Copy now go to the 1st frame window of the background image an go to Edit>Paste into new raster layer an with your move tool place the bird on the right side of the lights click your mouse to set it into place

29. Animations>Frame Properties change to 45 click okay

30. View>Animation to see the birds moving it'll 2 of them

31. Open Cookie image an make it an F:6 then add it to the tag as you did the bird , place back as she was in the psp program

32. Animations>Resize Animation 600 width pixels click okay

33. Go to File new transparent image 500 x 500 your choice of font, color type your name them crop it then give it an reading of F:6 then scroll the 1st frame window then add it to your image

34. Go to File save as GIF Format this completes the tutorial it is for personal use only. Thank you for purchasing Cookie Bikini 1 and may you enjoy the freebies


Hugs Tinkers Boo
written June 17th, 2018 

Summer Nights Tutorial





Summer Nights Tutorial

Materials Need: FTU Tut

Purchase Cookie Bikini 2 HERE
Surf Up Teddy-bear Kit HERE (free)
Summer Nights Tag Template HERE (free)

Open PSP Program

1. Open the tag template psp image go to Windows>Duplicate close the original out now delete the copyright banner

2. Go into (Surf Up Teddy-bear Kit) an open Bonus Paper 1 an go to Edit>Copy now go down to the white template (raster 2) and go to Selections>Select all>Float now go to Layers>Add new raster layer now go to the paper an go to Edit>Copy then go to the image an go to Edit>Paste into Selections of the new raster layer then go to Selections>Select None

3. Go the background paper an go to Adjust>Brightness and Contrast with this setting below

Brightness -61
Contrast 27
Check Linear Mode

Click okay (this will darken the background making it look like it is night time )

4. Open the Palm Tree an go to Edit>Copy now go the template palm tree layer an go to Edit>Paste into new raster layer an with your move tool place the palm tree on to of the template palm tree it will fit into place

5. Open Beach Sand an go to Edit>Copy now go to the sand template an go to Selections>Select all>Float now go to Edit>Paste into new raster layer an with your move tool place the sand on the top then go to Layers>Duplicate move the duplicate sand down a little and over to the left, then go to Layers>Duplicate an do the right side then go to Layers>Merge>Merge Down so all 3 sand layers are on the same layer then go to Selections>Invert then highlight the sand an go to Edit>Cut to remove the extra sand then go to Selections>Select None

6. Open Bonus Paper 4 go to Edit>Copy now go down to the black square template (raster 4) go to Selections>Select all>Float now go to Edit>Paste into Selection keeping the marching ants go to your Adjust>Brightness and Contrast (same as before) click okay then go to Selections>Select None

7. Go to the word art an move up a hair up then go to your 3d Effects>Drop Shadow of -2 -2 50 2 black click okay

8. Open Paper 14 add it to your foreground pattern 0 angle, 100 scales click okay now go down to the black template (raster 1) and go to Selections>Select all>Float then go to Layers>Add new raster layer then click on the paint can and paint the strip paper into the marching ants, keep the marching ants go to your 3d Effects>Drop Shadow of -2 -2 50 2 black click okay then again at 2 2 50 2 black click okay then go to your Adjust>Brightness and Contrast (same as before) click okay then go to Selections>Select None. (keep paper open)

9. Go to the white square template (raster 3) and do step 8 again to it then close the paper we done using it

10. Open Bag 2 (or your choice) an go to Image>Resize 20% go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the bag down into the sand on the left side

11. Go to your wrap brush (default setting) an push it an little up on the bag it make the sand go up on the bag making it sit in the sand

12. Open Beach Ball Teddy-bear 1 (or 2) an go to Image>Resize 25% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an move the teddy-bear in front of the bag as shown above

13. Open Boat an go to Adjust>Brightness and Contrast (same as before) then go to Image>Resize 20% now go to Edit>Copy now go down to the background ocean an go to Edit>Paste into new raster layer an with your move tool place the boat into the water now take your wrap brush an push up a little on the boat making the water go up as the boat in the water now lol

14. Open Tiki Bar an go to Adjust>Brightness and Contrast (same as before) then go to Image>Resize 45% now go to Edit>Copy now go to the images an go to Edit>Paste into new raster layer and with your move tool place the tiki bar on the left side of the palm tree as shown above

15. Open Both Tropical Drinks an go to Image>Resize 10% then go to Edit>Copy then go to the images an go to Edit>Paste into new raster layer and with your move tool careful grab the drink an place them on the tiki bar as shown above

16. Open Umbrella 2 an go to Image>Mirror then go to Image>Resize 55% now go to Edit>Copy now go down to the sand layer an go to Edit>Paste into new raster layer an with your move tool place the umbrella a little behind the bag as shown above

17, Open Water Tube 2 (or your choice 3 to choose from) an go to Image>Resize 45% now go to Edit>Copy now go to the top of the image layers an go to Edit>Paste into new raster layer an with your move tool place the tube on the right side of the sand as shown above

18. Open Cookie Bikini 2 (raster 2) go to Edit>Copy now go to Edit>Paste into Image, Close the PSP Image then go to Image>Resize 600 height pixel then 80% then go to Image>Mirror now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layers then place her in front of the water tube as shown above once in place use the wrap brush an little beneath her sandals (optional)

19. Add copyright as shown below

  ©Tinkers Boo
www.picsfordesign.com
PFD# (copyright license number) by (name)

20. Go to Layers>Merge>Merge Visible

21. Crop tool an crop the extra transparent image (optional)

22. Add your name if you wish

23. Go to File save as PNG Format this completes the tutorial it is for personal use only and thankyou for purchasing Cookie Bikini 2 and may you enjoy the other freebies designs


Hugs Tinkers Boo
written June 17th, 2018 

Hot Summer Day Tutorial *It's Animation*

90ojv0t2 o
Hot Summer Day Tutorial *It's Animation*

Materials Need: PTU Tut

Purchase Message Bottle Kit HERE
Summer in Fun Kit HERE (Free)
Hot Summer Day Tag Template HERE (Free)
Lil Bits Swim Suit HERE (Free)
Swirl Reflection HERE (Free)
 Jasc Animation HERE (Free)

Open PSP Program

1. Open the tag template go to Windows>Duplicate close the original out then delete the copyright banner if you can not open the psp image then build it with the PNG templates by opening the base transparent image then taking the templates go to Edit>Copy then Edit>Paste into new raster layer til build the templates into layers look like the sample provide otherwise lets go to step 2

2.  Go into (Message Bottle Kit) TOU Folder an open the color chart put the green color into the foreground colors and pale green color (#7ed6be) into the background solid colors then make this gradient in the foreground as shown below use # 4 Linear mode




Go to the grass template an go to Selections>Select all>Float then go to Layers>Add new raster layer then click on the paint can an paint the gradient color into the new raster layer then go to Blend>Overlay then go to Selections>Select None

3. Now 2 step 2 again but this time do the yellow color into the background and the peach orange color into the foreground made the same gradient again then go to the sun template go to Selections>Select all>Float then go to Layers>Add new raster layer then click on the paint can and paint the yellow-peach orange gradient into the new raster layer then go to Blend>Overlay then go to Selections>Select None.

4. Now 2 step 2 again but this time place the hot pink into the background color and the lite pink into the foreground color make the same gradient as did above, go to the word art an go Selections>Select all>Float now go to Layers>Add new raster layer now click on the paint can an paint the pink into the word art once done go to Selections>Select None

5. Now go to the white word art an move it over a inch to the left once done go to Image>Negative turn the word art from white to black

6. Close the color chart we done using it

7. Open Paper 8 add it to your foreground patterns 45 angle, 25 scale click okay now go down to your white circle template (raster 1) an go to Selections>Select all>Float now go to Layers>Add new raster layer click on the paint can an paint the strip paper into the marching ants of the new raster layer then go to Selections>Select None. Close the paper

8. Open Paper 5 an go to Edit>Copy now go down to the black circle template (raster 2) an go to Selections>Select all>Float now go to Layers>Add new raster layer now go to Edit>Paste into Selection keep the marching ants an go to your 3d Effects>Drop Shadow of -2 -2 50 2 black click okay then again at 2 2 50 2 black click okay now go to Selections>Select None

9. Go into (Summer Fun) Kit an we want to open the Fence go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool lay the fence on the left side then go to Layers>Duplicate with your move tool adjust it on the right side move the right side down a little then adjust the left side fence to line up with the right side. Then go to the top of the fence an go to Layers>Merge>Merge Down so both fences are on the same layer

10. Open Ladybug Divider an go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an it will line up with the fence as shown above

11. Open the Pool 1 go to Image>Resize 80% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place it on the right side of the grass as shown above

12. I want you to open the Cool, Shark, Duck and the Tree to this kit, the Cooler, Duck and Shark can go mini-size (we get to them in a few) the tree go to Image>Resize 70% go to Edit>Copy now go down beneath the fence layer an go to Edit>Paste into new raster layer an with your move tool place it on the right side then go Layers>Duplicate move the duplicate to the left side, then go to Layers>Duplicate an move the duplicate on the left side above the fence move it behind the pool on the left side as shown above (we are done with this kit an the other parts told open we get to them in a few moments down in the tutorials)

13. Open the Shark an go to Image>Resize 25% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the shark on the left side inside the pool then take a small eraser an erase a little bit of the bottom of the shark making it look like it is actually in the pool

14. Open Lil Bit pose 4 go to Image>Resize 70% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place her into the pool on the right side once in place take your small eraser an erase Lil bits feet so it looks like she in the swimming pool

15. Go into (Message Bottle Kit) an open the lawn chair an go to Image>Resize 80% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the lawn chair on the left side as shown above

16. Open Cookie Lifeguard 3 an go to Image>Mirror then go to Image>Resize 80% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place Cookie into the lawn chair (don't worry about the left arm we will hide it in a few moments)

17. Open the Duck we mini-size an go to Image>Resize 25% now go to Edit>Copy now go to the top image layers and go to Edit>Paste into new raster layer an with your move tool place the duck toy into Cookie hand it will fit into place lol

18. Open Beach Bag 1 (your choice there 3 choose from) then go to Image>Resize 30% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the bag in front of the lawn chair on the left side (hide Cookie) as shown above

19. Open the Cooler we mini-size an go to Image>Resize 55% now go to Edit>Copy now go to the top image layers and go to Edit>Paste into new raster layer an with your move tool place it in front of the beach bag by the lawn chair as shown above

20. Open Radio an go to Image>Resize 25% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the radio in front of the cooler as shown above

21. Open the Camera an go to Image>Resize 25% then 55% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the camera on top of the cooler as shown above

22. Open Beach Ball 1 (or 2) an go to Image>Resize 20% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the ball in front of the lawn chair in front of the swimming pool as shown above

23. Now go to the top an close off all layers down to the shark an go down beneath it an go to Layers>Merge>Merge Visible , then close the pool image we merge re open the other elements again and then go to Layers>Merge>Merge Visible now you should have 2 images

 A. Pool, Fence, Grass, Sun and Background

 B. Elements, Cookie & Lil Bit

24. Add copyright as shown below

 ©Tinkers Boo
www.picsfordesign.com
PFD# (copyright license number) by (name)

25. Go to Windows>Duplicate now do the following below

A. Optional take your crop tool and crop the image out of the extra transparent image 

B.Take the background an go to Layers>Merge>Merge All (make the white in background of the image) then go to Add>Border 5 go Selections>Select All>Modify>Contrast 5 Click okay then go to Selections>Invert now open the gradient should be the pink that we use last an click on the paint can and paint the pink into the marching ants.

Then go to Add>Border 25 click okay now go to the foreground patterns (should be the strip paper if not open Paper 8 add it to your foregrounds at 45 angle, 25 scale click okay then go to Selections>Select all>Modify>Contrast 25 click okay then go to Selections>Invert then go to Layers>Add new raster layer then click on your paint can an paint the strip paper into the marching ants

Then go to Add>Border 2 click okay then go to the foreground back to the pink gradient then go to Selections>Select all>Modify>Contrast 2 click okay then go to Selections>Invert then go to Layers>Add new raster layer click on your paint can and paint the pink gradient into the marching ants then go to Selections>Select None.

Now save the Background in JPG Format

 C. Delete the background and save Cookie & Lil Bits elements image in PNG Format

26. Open the Swirl Reflection , open the background image into it, and go to Outline click Begin an slowly with your mouse draw around the swimming pool once you at the place your start click your mouse to make it have marching ants then do the following samples below

A. Click on the Ripples 1st place this setting below

 B. 2 click on the rings (next to the ripples) and do this setting below
C. Now I want you to click the red Y and do the following below

D. Click the red GIF click okay, save it as it run it into 15 frames for you, when you save on your documents place it as HSD

27. Open Jasc Animation, open the background we save in Swirl Reflection go to View>Animation scroll side an you can see the pool inside is moving (pretty cool huh) now open Cookie & Lil Bits image an go to step 28

28. Go to Edit>Select all, Edit>Copy, Edit>Duplicate til get to F:17 then scroll to the end of F:17 highlight it an go to Edit>Duplicate til get to F:19 then highlight F:19 and go to Edit>Duplicate one more time so you get to an reading of F:20 then scroll to the 1st window go to step 29

29. Take the image Cookie & Lil Bits an go to Edit>Select all, Edit>Copy now go to the swimming pool make sure you are on the 1st window frame, scroll down a little so you see the pool and grass element in the image then go to Edit>Select all, right click your mouse go to Paste>Into Select Frame with your mouse move Cookie & Lil Bits with the elements back into place as you had it in your psp program once in place click your mouse to set in place

30. Go to Animations>Resize Animation 600 Width pixels an click okay (downsize the tag)

31. View>Animation (see the water move again lol - optional)

32. Go to File new size 500 x 500 transparent image, choose your color and font you want type your name, crop your name out of the extra transparent image then go to F:20 then scroll to the 1st window an add it to your tag where ever want your name at

33. Go to File save as GIF format this completes the tutorial it is for personal use only. Thank you for purchase my scrap kit Message Bottle, may you enjoy my other freebies designs as well. You can see other tutorials with the scrap kit Message Bottle HERE or under Summer tuts


Hugs Tinkers Boo
written June 17th, 2018

Saturday, June 16, 2018

Lazy Day of Summer Tutorial


Lazy Day of Summer Tutorial

Materials Need: PTU Tut

Purchase Message Bottle Kit HERE
Lazy Day of Summer Tag Template HERE (free)
Cookie Black Bikini HERE (free)

Open PSP Program

1. Open the tag template go to Windows>Duplicate close the original then delete the copyright
if you can not open the psp image then build it in layers with the png templates provide

2. Go into the Kit, Tou Folder an open the Color Chart we going to color a few templates first follow the steps below

 A. The sun is in 3 templates go to the 1st sun and use color peach orange color an go to Selections>Select all>Float now go to Layers>Add new raster layer click on your paint can an paint the peach orange into the sun layers (each one) once done go to Blend>Overlay then go to Selections>Select None

Now change the foreground solid color to yellow then go to the template Sun 2 an go to Selections>Select all>Float now go to Layers>Add new raster layer click on your paint can an paint the yellow color into the sun template then go to Blend>Overlay go to Selections>Select None. Then go to the sun template 2 an go to Adjust>Brightness and Contrast with this setting below

Brightness -51
Contrast -21
Check Linear Mode

Click okay

Now go to the 3rd Sun template add the same Brightness and Contrast it to it, then go to Selections>Select all>Float now go background foreground solid colors of the yellow and then add the peach orange color to the foreground colors then go to the gradient foreground with this setting below and use linear # 4 then click on your paint can an paint the 2 colors into the 3rd part of the sun then go to Blend>Overlay then go to Selections>Select None


B. Add the green color into the foreground colors then go down to the palm tree (raster 3 palm tree) an go to Selections>Select all>Float then go to Layers>Add new raster layer click on your paint can an paint the green into the new raster layer then go to Blend>Overlay then go to Selections>Select None.

 Now add the brown color to the foreground for (raster 1 & 2 of the palm tree) an go to Selections>Select all>Float now go to Layers>Add new raster layer now click on your paint can and paint the brown then go to Blend>Overlay then go to Selections>Select None. Once done both templates close the color chart we done using it 


3.  Move the brown color to your background colors we get to it in a moment on the fence

4. Open Paper 7 go to Edit>Copy now go down to the black square template (raster 1) and go to Selections>Select all>Float now go to Edit>Paste into Selection then go to Selections>Select None

5. Open Sand an go to Edit>Copy now go above the green palm tree an go to Edit>Paste into new raster layer an with your move tool move the sand down to the bottom want it a little in front of the fence place it on the left then go to Layers>Duplicate an move the sand towards the right once adjust go to top of the sand an go to Layers>Merge>Merge Down now take your eraser an erase the top of the sand across (middle of the fence) just want to show a little the sand beneath the fence from both ends as shown above

6. Move the brown color back into the foreground colors then go to the template fence an go to Selections>Select all>Float now go to Layers>Add new raster layer now click on the paint can an paint the brown into the marching ants of the new raster layer keep the marching ants an go to your 3d Effects>Texture Effects>Blinds with this setting below

Width 2
Opacity 25
Color #010101
Uncheck horizontal
Check Light from left/top

Click okay. Now go to Blend>Overlay now go to  Layers>Duplicate now go to your 3d Effects>Cut Out Effects with this setting below

Offset V/H 0
Opacity 85
Blur 35
Shadow color #000000

Click okay then go to Selections>Select None

7. Go to the white word art Lazy Day of Summer an go to Selections>Select all>Float (leave as is go to the next step)

8. Open Paper 5 an go to Edit>Copy now go to the images an go to Edit>Paste into Selection keep the marching ants going an go to your 3d Effects>Drop Shadow of 2 2 70 2 black click okay now go to Selections>Select None. Close the paper

9. Open Palm Tree 1 an go to Image>Resize 70% now go to Edit>Copy now go down to the sand layer an go to Edit>Paste into new raster layer an place it as shown above

10. Open Palm Tree 2 an do step 9 again but this time move it on the top of the fence as shown above

11. Open Message Bottle 2 (or 1 your choice) go to Image>Resize 55% now go to Edit>Copy now go down to the sand layer an go to Edit>Paste into new raster layer an with your move tool move the message bottle down on the sand on the right side as shown above

12. Open Lawn Chair an go to Image>Resize 55% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the lawn chair on the left side in front of the fence as shown above once in place go to Layers>Duplicate, Image>Mirror an adjust the right side of the lawn chair

13. Go to the sand an go to Layers>Duplicate an with your move tool move it up a little to place it a little more beneath the lawn chairs

14. Open Beach Bag 1 (or your choice 3 choose from) an go to Image>Resize 30% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the bag on the left side in front of the lawn chair as shown above

15. Open Radio an go to Image>Resize 25% now go to Edit>Copy now go to the top of the image layers an go to Edit>Paste into new raster layer and with your move tool place the radio in front of the lawn chair on the right side as shown above

16. Open Cookie Lifeguard 3 an go to Image>Mirror now go to Image>Resize 80% now go to Edit>Copy now go down beneath the beach bag an go to Edit>Paste into new raster layer an place her into the lawn chair on the left side she fit into place as shown above

17. Open Cookie Black Bikini 2 an go to Image>Resize 70% now go to Edit>Copy now go down beneath the radio an go to Edit>Paste into new raster layer an with your move tool place Cookie into the right lawn chair

18. Now with your move tool move the word art in between the 2 girls of Cookie as shown above

19. Open Drink Sex on the Beach lol an go to Image>Resize 25% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the drink next to the radio on the right side

20. Open Drink Hawaii Blue lol an do step 19 again but this time place it on the left side in front of the beach bag as shown above

21. Open Rocks an go to Image>Resize 70% now go to Edit>Copy now go down beneath the beach bag an go to Edit>Paste into new raster layer an with your move tool move the rocks beneath the beach bag as shown above then go to Layers>Duplicate, Image>Mirror an adjust it on the right side as shown above (keep the rock element open)

22. Take the rock element an go to Image>Mirror now go to Edit>Copy now go down to the fence an go to Edit>Paste into new raster layer an with your move tool move the rocks down in front of the palm tree (behind the fence) but put the rocks into the sand in front of the fence as shown above

23. Go to both Cookie layers an go to 3d Effects>Drop Shadow of 0 0 70 25 black click okay

24. Open Seashell 1 go to Image>Mirror now go to Image>Resize 10% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the seashell into Cookie hand it fit into place

25. Go to the top image layers an go to Layers>Merge>Merge Visible

26. Add copyright as shown below

©Tinkers Boo
www.picsfordesign.com
PFD# (copyright license number) by (name)


27. Image>Resize 80-90% I use 90% (optional)

28. Add your name with the choice of the font

29. Go to File save as PNG Format this completes this tutorial it is for personal use only.
Thank you for purchasing my scrap kit Message Bottle and may you also enjoy the freebies provide for you of my designs. Also see other summer tutorials made with my scrap kit under Summer xx

Hugs Tinkers Boo
written June 16th, 2018


Fun in the Summer Tutorial


Fun in the Summer Tutorial

Materials Need: PTU Tut

Purchase Message Bottle Kit HERE
Fun in the Summer Tag Template HERE (free)

Open PSP Program

1. Open the tag template go to Windows>Duplicate close the original now delete the copyright banner

 Now Delete the Umbrella and Sand templates (we don't need for this tutorial) 

2. Go into the TOU Folder an open the Color Chart we going to color the sun with the following steps below

 A. Go to the 2nd row of colors an choose the # 1-peach orange and # 6-Yellow add the yellow to the background foreground colors, and the peach orange to the foreground colors then go to your Gradient locate the foreground and do the setting below (want the linear # 4)


B. Go to the Sun template an go to Selections>Select all>Float now go to Layers>Add new raster layer an with your move tool click on the paint can an paint the sunshine color into the new raster layer then go to Selections>Select None

C. Now go to the sun template an go to your Adjust>Brightness and Contrast with this setting below

Brightness -51
Contrast -21
Check Linear Mode

Click okay. Now close the color chart we done using it

3. Open Paper 8 an add it to your foreground pattern 45 angle, 25 scale click okay now go down to the black circle template (raster 1) and go to Selections>Select all>Float now go to Layers>Add new raster layer click on your paint can and paint the strip paper into the marching ants of the new raster layer then go to Selections>Select None

4. Open Paper 5 an go to Edit>Copy now go down to the white circle template (raster 2) an go to Selections>Select all>Float now go to Edit>Paste into Selection keep the marching ants going an go to your 3d Effects>Drop Shadow of -2 -2 50 2 black click okay then again at 2 2 50 2 black click okay now go to Selections>Select None

5. Open Sand an go to Edit>Copy now go to the images an go to Edit>Paste into new raster layer an with your move tool move it down then go to Layers>Duplicate move the sand a little more down (adjust it between each other) then take your wrap brush (default setting) and push the sand together on the edges kinda push down to blend together as shown above

6. Open Beach Umbrella 1 (or 2 you choice) an go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an adjust it as shown above once happy where you want it take your eraser an erase an little of the pole on the sand

7. Open Beach Bag 2 (or your choice) an go to Image>Resize 40% now go to Edit>Copy now go the top image layers an go to Edit>Paste into new raster layer an with your move tool place the bag on the left side once in place use your wrap brush push a little up a few times on the bag making the sand go up on the bag as shown above

8. Open Beach Ball 1 an go to Image>Resize 40% now go to Edit>Copy now go down beneath the bag an go to Edit>Paste into new raster layer an with your move tool place it behind the bag on the left side as shown above

9. Open Radio an go to Image>Resize 40% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the radio in front of the bag and the beach ball as shown above now take your wrap brush push a little left to make the radio sit in the sand as shown above

10. Open Camera an go to Image>Resize 25% then go to Edit>Copy now go to the top image layers an  go to Edit>Paste into new raster an with your move tool place it on the right side of the bag as shown above

11. Open Cookie Lifeguard 3 an go to Image>Resize 80% now go to Edit>Copy now go down beneath the Beach Umbrella an go to Edit>Paste into new raster layer an with your move tool adjust Cookie into the sand as shown above then use the wrap brush around her leg and her right hand

12. Open Beach Cabin an go to Image>Resize 45% now go to Edit>Copy now go down beneath Cookie an go to Edit>Paste into new raster layer an with your move tool place it in the center down into the sand as shown above use the wrap brush a little on the beach cabin (optional)

13. Open Beach Fence 1 (or 2) an go to Image>Resize 70% now go to Edit>Copy now go to the images an go to Edit>Paste into new raster layer an with your move tool adjust it on the right side behind Cookie as shown above

14. Open Palm Tree 2 (or 1) an go to Image>Resize 70% now go to Edit>Copy now go down to the sand layer an go to Edit>Paste into new raster layer an with your move tool place the palm tree on the left side as shown above

15. Close off the Beach Cabin

16. Open Vine 3 an go to Image>Resize 80% now go to Edit>Copy now above Palm tree layer an go to Edit>Paste into new raster layer an with your move tool move it behind the beach fence on the right side once adjust go to Layers>Duplicate, Image>Mirror adjust the left side then go to Layers>Duplicate move the duplicate an little over

17. Open Vine 2 an go to Image>Mirror then go to Image>Resize 2 times at 55% now go to Edit>Copy now go down to the palm tree layer an go to Edit>Paste into new raster layer an with your move tool adjust it on the left side (hide the strips circle) then go to Layers>Duplicate, Image>Mirror an adjust it on the right side then take your eraser on the left side an erase on the top of the umbrella

18. Open the Beach Cabin

19. Open Drink Sex on the Beach lol an go to Image>Resize 25% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer and with your move tool place the drink in front of her right hand once adjust use your wrap brush on the bottom of the glass then once done go to your 3d Effects>Drop Shadow of 0 0 60 5 black click okay

20. Open Seashell 1 go to Image>Resize 10% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an lay the seashell into Cookie hand (it'll fit into place) then go to Layers>Duplicate an place the shell on the right side of the sand

21. Open Seashell 2 an go to Image>Resize 10% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place the aqua shell on top of the glass as shown above

22. Open Starfish an go to Image>Resize 55% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer an with your move tool place it in the sand in front of Cookie as shown above the erase an little of it making it look like it stuck in the sand

23. Go to top image layers an go to Layers>Merge>Merge Visible

24. Add copyright as shown below

 ©Tinkers Boo
www.picsfordesign.com
PFD# (copyright license number) by (name)


25. Crop the tag out of the extra transparent image (optional)


26. Add your name with your choice of font


27. Go to File save as PNG Format this completes this tutorial it is for personal use only.
Thank you for purchasing my summer kit Message Bottle may you enjoy it and look for other tutorials written with it under Summer tuts




Hugs Tinkers Boo
written June 16th, 2018


Beach Bum 2 Tutorial



Beach Bum 2 Tutorial

Materials Need: PTU Tut

Purchase Message Bottle Kit HERE
Beach Bum Tag Template HERE (free)

Open PSP Program

1. Open the tag template go to Windows>Duplicate close the original out now delete the copyright banner then go down to the white 3 square frame either use your selection tool or eraser an erase the lines in the middle as shown above..

 A. If you can not open the psp image then build it with the png templates by opening the base transparent then go to Edit>Copy then Edit>Paste into new raster layer til get it all looking like the sample provide.. then do the follow as step 1 with the square 3 frame

2. Go into the Kit Tou Folder an open the Color chart we first going to color some of the templates

 A. Go to the palm tree an go to Selections>Select all>Float now go to Layers>Add new raster layer click on the green color to your foreground solids then click on your paint can an paint the green into the new raster layer then go to Blend>Overlay an then go to Selections>Select None

 B. Go to the board walk an go to Selections>Select all>Float now go to Layers>Add new raster layer now click on the brown color to your foreground solids then click on your paint can an paint the brown color into the new raster layers then go to Blend>Overlay then go to Selections>Select None

C. Go to Ball 1- use # 6 color off white do step B again to Ball 1

D. Go to Ball 2- Choose 3 Colors I use # 1-Turqoise # 2- Hot Pink # 10-Blue and then do step B again to Ball 2

E. Go to Ball 3- Choose 1 Color I use the # 12-Yellow and then do step B one more time

3. Move the Arrow, word art up a little and delete the pole layer

4. Open Paper 6 go to Edit>Copy now go to your gray rectangle template (raster 3) an go to Selections>Select all>Float now go to Edit>Paste into Selections then go to Selections>Select None
close the paper 

5. Take your Selection tool an go down to the Boardwalk an make a box line up with the end of the water an then go to Edit>Cut then also cut the boardwalk template as shown above

6. Open Paper 7 go to Edit>Copy now go down to the black template (raster 1) and go to Selections>Select all>Float now go to Edit>Paste into Selections then go to Selections None close the paper

7. Open Paper 8 add it to your foreground pattern 45 angle, 50 scales click okay now go down to your gray two rectangle templates (raster 2) an go to Selections>Select all>Float now go to Layers>Add new raster layer now click on your paint can an paint the strips paper into the two templates then once done keep the marching ants an go to your 3d Effects>Inner Bevel with this setting below

Bevel # 2
Width 20
Image Smoothness 15
Depth 3
Ambience 0
Shininess 0
Color is White
Angle 315
Intensity 50
Elevation 30

Click okay then go to Selections>Select None. (keep paper open)

8. Go to the white frame (raster 4) an go to Selections>Select all>Float now go to Layers>Add new raster layer now click on your paint can an paint the strips paper into the new raster layer (keep the marching ants) go to your 3d Effects>Inner Bevel same as before (above step 7) and then go to 3d Effects>Drop Shadow of -2 -2 50 2 black click okay then again at 2 2 50 2 black click okay then go to Selections>Select None. Close the paper we done using it

9. Open Paper 10 an add it to your foreground pattern  0 angle, 50 scales click okay now go down to the surfboard template an go to Selections>Select all>Float now go to Layers>Add new raster layer now click on your paint can an paint the pattern paper into the new raster layer then go to Selections>Select None. Go to Layers>Duplicate, go to 3d Effects>Cut Out Effects with this setting below

Offset V/H 0
Opacity 85
Blur 35
Shadow Color Black
Uncheck Fill interior Color (we want it close off)

Click okay. Close the paper

10. Open Sand an go to Image>Resize 80% now go to Edit>Copy now go above the strip frame (raster 4) an go to Edit>Paste into new raster layer an with your move tool move the sand down beneath the beach ball (shown above) now take your wrap brush (default setting) an push the sand
a little up on the left side to cover the strips by the surfboard as shown above (kinda push the sand a little around with the wrap brush)

11. Open Beach Fence 2 (or 1 your choice) go to Image>Resize 80% now go to Edit>Copy now go beneath the black arrow template an go to Edit>Paste into new raster layer an with your move tool place it down on the strip paper on the right side as shown above line the fence with the edge of the strip frame

12. Open Surfboard 1 an go to Edit>Copy now go down the pattern surfboard an go to Edit>Paste into new raster layer an with your move tool line the 1st surfboard on the edge (cover strips on the bottom)

13. Open Surfboard 2 an do step 12 again but leave it by surfboard 1 as shown above

14. Open Palm Tree 2 an go to Edit>Copy now go down to the green palm tree an go to Edit>Paste into new raster layer an lay it a on top next to the surfboard 2 as shown above

15. Open Palm Tree 1 an go to Image>Resize 70% now go to Edit>Copy now go to the images an go to Edit>Paste into new raster layer an with your move tool place the palm tree in the grab as shown above

16. Open Flower 1 (or your choice 3 choose from) an go to Image>Resize 45% now go to Edit>Copy now go to your flower template an go to Edit>Paste into new raster layer an lay your flower you choose on top of the flower template then delete the flower template and the pearl template

17. Open Boat 2 an go to Image>Mirror then go to Image>Resize 25% now go to Edit>Copy now go down to the brown boardwalk an go to Edit>Paste into new raster layer an with your move tool place the boat on the boardwalk towards the end of the water

18. Move the black arrow and word art a little up on the pink flower (or the flower you choose) as shown above

19. Open Cookie Lifeguard 1 an go to Image>Resize 60% now go to Edit>Copy now go above the boat an go to Edit>Paste into new raster layer an place her on the board walk as shown above

20. Add a Drop Shadow to Cookie go to your 3d Effects>Drop Shadow of 0 0 70 25 black (gives it depth)

21. Open Beach Bag 3 (or the color of the flower you choose) an go to Image>Resize 20% now go to Edit>Copy now go down beneath Cookie an go to Edit>Paste into new raster layer an with your move tool place it into her left hand then once in place go to Layers>Duplicate, Move the bag above Cookie now take your small eraser an erase the bag on her hand then once happy move the bag up above the strips frame

22. Now go down to the white frame, and the strips frame an with your eraser erase it beneath the bag to the beach ball (it's going to open the boardwalk) as shown above

23. Open Paper 1 add it to your foreground pattern 0 angle, 50 scales click okay now go to the black arrow template an go to Selections>Select all>Float now go to Layers>Add new raster layer click on your paint can paint the blue paper into the marching ants then go to your 3d Effects>Inner Bevel (same as before) click okay then go to Selections>Select None

24. Go to the word art Beach Bum an adjust it on the blue arrow then once adjust go to your 3d Effects>Drop Shadow of 2 2 70 2 black click okay (give depth)

25. Add copyright as shown below

©Tinkers Boo
www.picsfordesign.com
PFD# (copyright license number) by (name)


26. Go to Layers>Merge>Merge Visible


27. Crop the image out of the extra transparent image


28. Add your name if you wish with your choice of font


29. Go to File save as PNG format this completes this tutorial it is for personal use only. Thank you for purchasing my scrap kit may you enjoy it and view Summer tuts for other tutorials written with it to make graphic tags designs xx


Hugs Tinkers Boo
written June 16th, 2018

Beach Babe Tutorial


Beach Babe Tutorial

Materials Need: PTU Tut

Purchase Message Bottle Kit HERE
Beach Babe Tag Template HERE


Open PSP Program

1. Open the tag template in PSP Image, If you can't open it then built it together with the PNG templates by starting off with the base transparent an build layers by going to Edit>Copy and then Edit>Paste into new raster layers make look like the sample..

 A. If you can open the PSP Image delete the copyright banner, close the word art off, and delete the fence arrow only

2. Go into the Kit, TOU Folder an open the Color Chart now do the following below

  A. Go to the Pole (raster 6)  layer an go to Selections>Select all>Float now go to Layers>Add new raster layer add the color brown into the foreground solid colors click on your paint can an paint the brown into the new raster layer then go to Blend>Overlay then go to Selections>Select None

 B. Go to the life tube 2 (Raster 2) , go to Selections>Select all>Float now go to Layers>Add New raster layer now choose 2 colors add to both your foreground/background solid colors then click on your paint can an paint them into the new raster layer once done go to Blend>Overlay then go to Selections>Select None.

3. Open Paper 9 add it to your foreground pattern 45 angle, 50 scale click okay now go to the surfboard an go to Selections>Select all>Float now go to Layers>Add new raster layer click on your paint can an paint floral paper into the marching ants on the new raster layer then go to Blend>Overlay then go to Selections>Select None. Close the paper

4. Go to the Surfboard template an go to your Adjust>Brightness and Contrast Setting as shown below

Brightness  -53
Contrast -21
Check_Linear Mode

Click okay (this depth the color back into the surfboard)

5. Open Paper 8 an add it to your foreground pattern 45 angle, 50 scales click okay now go down to your black template (raster 1) an go to Selections>Select all>Float now go to Layers>Add new raster layer click on your paint can an paint the strip paper into the marching ants on the new raster layer then once done go to Selections>Select None

6. Open Paper 5 an go to Edit>Copy now go down to your white template (raster 2) an go to Selections>Select all>Float then go to Edit>Paste into Selections (program wizard paper into the white template layer) then keeping the marching ants go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then close the paper out we done with it

7. Open Palm Tree 1 an go to Edit>Copy now go down to the palm tree template an go to Edit>Paste into new raster layer an with your move tool place the palm tree on top of the template it will fit into place

8. Open Palm Tree 2 an go to Image>Resize 90% now go to Edit>Copy now go to the Images an go to Edit>Paste into new raster layer an with your move tool place the palm tree 2 on top of the palm tree 1 as shown above

9. Open Bench Fence 2 (or 1 your choice) an go to Edit>Copy now go to the brown pole an go to Edit>Paste into new raster layer an with your move tool place it in front of the brown pole as shown above

10. Open Sand an go to Edit>Copy now go above the Palm Trees an go to Edit>Paste into new raster layer an with your move tool slide it down to the bottom once in place take your wrap brush an little an push it on the left side to hide the strips paper, push little up on the trees

11. Open Message Bottle 1 (or 2 your choice) an go to Image>Resize 55% now go to Edit>Copy now go to Images an go to Edit>Paste into new raster layer an with your move tool slide it down on top of the sand as shown above

12. Open the word art Beach Babe an move it into the blue paper as shown above

13. Open Cookie Lifeguard 2 an go to Image>Resize 80% now go to Edit>Copy now go to the top image layers an go to Edit>Paste into new raster layer an with your move tool place Cookie into the sand once in place take your wrap brush (default setting) an push a little to make the sand on her legs, tummy, an push her hair a little up the right (optional) as shown above

14. Go to Layers>Merge>Merge Visible

15. Add copyright as shown below

 ©Tinkers Boo
www.picsfordesign.com
PFD# (copyright license number) by (name)


16. Crop Tool an crop the extra transparent off (optional) increase tag a little


17. Add your name if you wish your choice of font


18. Go to File save as PNG format this completes the tutorial it is for personal use only and thank you for purchasing my scrap kit Message in the Bottle to do this tutorial look for other tutorials written with this kit under Summer




Hugs Tinkers Boo
written June 16th, 2018